Search the motherboard for ADD_HEADER/ JRAINBOW1/ JRAINBOW2. Note: If you cannot find any headers in the motherboard, please refer to the motherboard manufacturer’s user manual. After plugging everything in, it is now time to turn on the system to check if the fans spin and the lights turn on.Align the pin from the USB micro-splitter to the USB 2.0 header and insert them carefully.The 2.0 header will have nine pins that say USB/JUSB1/JUSB2 under the pins.Insert the other end in the controller’s micro-USB port.Connect one end of the USB micro-splitter to the USB 2.0 header in the motherboard.Connect the Controller to the Motherboardįinally, connect the RGB fans controller to the motherboard using the USB micro-splitter. This cable can either be a 4-pin Molex cable or a SATA cable and will power both the fans and the LED lights simultaneously. You need to connect one end of the power cable to the PSU (Power Supply Unit) itself and the other to the controller. Once you insert the RGB fans into the controller, connect this controller to a power source. It is recommended that you fill these numbered slots in ascending order. The cable from the RGB fans is connected to these slots. The controller will have 1, 2, 3 written on the slots. All these items are included inside when buying the RGB fan.įirst, you need to connect all the Static RGB fans to the controller with the fan. Even though you can connect multiple fans to the controller, it will only show one color currently being asked.īefore starting, here is a list of items that you require. You will need an RGB hub/bus/controller with the RGB fan to connect it to the motherboard. Also, connecting the static RGB fan is quite a hassle as the end of its cable will not fit on any of the motherboard headers. Static RGB FansĪs the name suggests, Static RGB fans contain static RGB lights, displaying only one color at a time. Connecting the Fans to Motherboardĭepending on the types of RGB fans, you can connect them accordingly. These type of fans does not require a separate RGB header. Doing this will provide power to the LED cable. However, some fans come with a controller plugged into the Molex cable from the power supply. Usually, if you have a motherboard that does not have an RGB header, the fan will spin, but the RGB may not work. The answer to this question mostly depends on the type of RGB fan you buy.

So keeping this in mind, this article will provide you with the right guidance to connect the RGB fans so that all of them are in sync. Failing to do so can make your setup messy and unattractive. However, if you do not have proper instructions, connecting the RGB fans can be quite tedious as all the colors in RGB fans need to be in sync. Installing RGB fans is arguably one of the best ways to make your gaming rig visually appealing.

Attaching led strip connector 4 pin